You are not logged in or registered. Please login or register to use the full functionality of this board...

Latest news: --- JLR SDD 159 the latest --- JLR SDD 159 the latest --- Scania SDP3 2.44.1 --- looking for flash file for.. --- BMW ISTA-D 4.22.40 Standalone FULL Mega --- Help --- Delphi Solution --- activation help --- VASPC 19.01.01 --- Need Stage 1 Seat ibiza 1.2 Simos 3 ---

Online Dyno Files Service

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mercedes-Benz w203 EIS problem help
07-30-2016, 06:51 PM
Post: #1
Mercedes Mercedes-Benz w203 EIS problem help
hi guys

i got problem my car wont start if i insert the smart key on ignition switch its wont turn and that sound used to be when i inserting the smart key in its gone noting

i know these cars got EIS common problems so what to do reprogram the key with software to get work again

SORRY FOR MY BAD ENGLISH

maxpower2015, proud to be a member of GarageForum since Mar 2015.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-31-2016, 08:30 AM
Post: #2
RE: Mercedes-Benz w203 EIS problem help
hi !
1.dismounted key housing
2. clean dust and lint from the inside
3.try again to start
if nothing happend you need Star c3 diagnostic unit to reprogram a key

ivalyx, proud to be a member of GarageForum since Jan 2016.
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: gabbiiiyyyy
10-05-2016, 01:51 PM
Post: #3
RE: Mercedes-Benz w203 EIS problem help
Try to heat eis, open it and find motorola chip and heat it, then try again

Išsiųsta naudojantis HUAWEI G700-U20 Tapatalk 4 Lt

kruto, proud to be a member of GarageForum since Sep 2016.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-28-2020, 10:43 AM
Post: #4
RE: Mercedes-Benz w203 EIS problem help
If key does not turn then
1. If steering lock installed then possibility of Key defective or Steering lock defective or EIS defective.
2. If steering no steering lock installed then key or EIS defective.
If you have any diagnostic unit connect to vehicle and check actual value from > control units>Body/Chassis>EIS>Actual Value>Drive authorization
Please check there is key detected or not, ESL opened or not then you can decide about EIS. If you can not decide, upload the screen shot.
Thanks,

azadmeduet, proud to be a member of GarageForum since Mar 2020.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)