You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
11-19-2017, 10:08 AM
Post: #1
Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
The software provided and the procedures proposed are intended for personal, educational and experimental use to install DiagBox 8.xx related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Link is provided in the attachment for "APP_Update_850-855.exe". This is intended to update Lexia and PP2000 components of DiagBox 8.50, 8.53 or 8.54 to 8.55.

Procedure:
1- Ensure you have a backup copy of the file "C:\AWRoot\bin\fi\APPDIAG.SYS" before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all DiagBox associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.

Done..! you may run DiagBox as usual.. Notice that DiagBox version will change to 07.855 after the update..

Have fun!

Regards, Simple.


Attached File(s)
APP_Update_850-855.txt
File Type: .txt
Downloaded: 1169 times
Size: 898 bytes


Simple, proud to be a member of GarageForum since Dec 2014.
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: manju1972 , Phils89 , DouglasBrock , Petrovic , keko , Zagnovisk , Rafaelmix , bufluca , reparoyo , lollo54 , burguer
02-21-2018, 09:27 AM
Post: #2
RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
Hi Simple!

Thank you for your work!
Installation is OK, DiagBox 7.855 indicates! In manual mode I try to program SMEG + IV2 in a 2015 C5 tourer car. It also wants to connect to the PSA server! He can not and does not give anything! What do I get rid of?

Best Regards: Steve850

Steve850, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-21-2018, 11:13 AM
Post: #3
RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
Hi


Or can not SMEG + IV2 program with 7.855?
What version do you have, can anyone know? Help!!!

Best Regards: Steve850

Steve850, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-23-2018, 04:20 AM
Post: #4
Citroen RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
(11-19-2017 10:08 AM)Simple Wrote:  The software provided and the procedures proposed are intended for personal, educational and experimental use to install DiagBox 8.xx related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Link is provided in the attachment for "APP_Update_850-855.exe". This is intended to update Lexia and PP2000 components of DiagBox 8.50, 8.53 or 8.54 to 8.55.

Procedure:
1- Ensure you have a backup copy of the file "C:\AWRoot\bin\fi\APPDIAG.SYS" before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all DiagBox associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.

Done..! you may run DiagBox as usual.. Notice that DiagBox version will change to 07.855 after the update..

Have fun!

Regards, Simple.
Hi Simple!


Lexia version 963830 / B, but with version 921815 / c, you want the PSA server and you do not program the device! Both hardware v.4.3.4!
Can somebody help me??!!

Best Regards: Steve850


Attached File(s)
Print.pdf
File Type: .pdf
Downloaded: 163 times
Size: 34.81 KB


Steve850, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-24-2018, 12:00 PM
Post: #5
RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
The fix for SMEG was issued in update 8.15, With respect to Telecoding without connecting to PSA, the procedure is listed somewhere in the forums.

Please notice that VCI firmware revision B is blocked beyond DiagBox version 5.29..

Simple, proud to be a member of GarageForum since Dec 2014.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-24-2018, 06:40 PM
Post: #6
Citroen RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
(02-24-2018 12:00 PM)Simple Wrote:  The fix for SMEG was issued in update 8.15, With respect to Telecoding without connecting to PSA, the procedure is listed somewhere in the forums.

Please notice that VCI firmware revision B is blocked beyond DiagBox version 5.29..

Thank you for your reply!
Lexia Version 963830 / C, v 4.3.4, but there are only two optocouplers!
Even with manual coding, if I did not read but I write, it does not work, but I get the above message.
Citroen C5 Tourer 2016 BlueHDI 180HP, SMEG+IV2
THX

Steve850, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-24-2018, 07:16 PM
Post: #7
RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
There are three issues here:
1- Your device is NOT a Full Chip one, I do not know if that causes a limitation with your car..
2- Some new PSA cars require the S. 1279 module, check if your car requires it.
3- New cars usually require DiagBox and do not utilise Lexia or PP2000, Check if your car one of them?

Simple, proud to be a member of GarageForum since Dec 2014.
Visit this user's website Find all posts by this user
Quote this message in a reply
02-24-2018, 07:34 PM
Post: #8
Citroen RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
(02-24-2018 07:16 PM)Simple Wrote:  There are three issues here:
1- Your device is NOT a Full Chip one, I do not know if that causes a limitation with your car..
2- Some new PSA cars require the S. 1279 module, check if your car requires it.
3- New cars usually require DiagBox and do not utilise Lexia or PP2000, Check if your car one of them?
Okay, I was afraid I should buy a new one! ):

THX

Steve850, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-03-2018, 12:58 PM
Post: #9
RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
Followed all your tutorials on how to update diagbox/lexia/pp2000 and it worked really well. Thanks a lot Big Grin

pipa, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-09-2018, 08:17 AM
Post: #10
Citroen RE: Lexia & PP2000 update 8.50-8.55 (DiagBox v8.55)
(03-03-2018 12:58 PM)pipa Wrote:  Followed all your tutorials on how to update diagbox/lexia/pp2000 and it worked really well. Thanks a lot Big Grin
Just a lesson! Not the installation and not the Chinese Lexia was the fault! SMEG + programming is inevitable without the PSA server connection! For the time being!

THX
Steve850

Steve850, proud to be a member of GarageForum since Feb 2018.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)