You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2018V Multi Diag Access J2534 Pass Thru OBD2 Device Support Multi Language
Yesterday, 10:23 AM (This post was last modified: Yesterday 12:59 PM by Belalmondeo.)
Post: #1
2018V Multi Diag Access J2534 Pass Thru OBD2 Device Support Multi Language
2018V Multi Diag Access J2534 Pass Thru OBD2 Device Support Multi Language


Check the link attached below for further info.

Hurry Up in case of purchase !!!! only 2 items left.

** A side note I'd like to turn Your attention to that this particular OBD Scanner could be the Cheapest J2534 Pass-Thru based device (meaning You can do flashing/programming with use of it) Check the attached file for the compatible software list, however You can get the same VCI for even cheaper if You considered an earlier Multi-Diag Office software version (2011) at least for 157.50$
You can do a hex file dump to the (PIC12F629) Chip right on the upper board to upgrade to a later version (most likely You'll find 2017 SP4 if You google it) and do fantomel's rework to get that device to work even smoother and more reliable, another thing to mention which is the 2018 software version, there unfortunately is no hex file found on the internet to dump for this Particular piece of software hence it's priced this way **


* Multi-diag Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface).
* Multi-diag Access J2534 support Multi-Language.

* 2018V Multi-Diag Access J2534 Pass-Thru OBD2 Device


Top 4 Reasons to Get Multi-Diag J2534:



1. Newest Version: 2018V
1. Languages: Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian,Russian, Serbian,Slovenian, Spanish, Swedish, Turkish.
3. New Features: Update 26 Brands Car Models - 3541 New System
4. It can be used on Win XP and Win 7 32Bit


Notice:
1. VCI Number: 076957
2. 2018 VMulti-Diag Access J2534 needs activation, after installing the software pls send ID (format is 27-xxxxxxxxxxx) to us, we will send the activation code.

Multi-Diag J2534 Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1. Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter

2. Air Conditioning
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators

3. Pollution control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe

4. Liaison to the ground
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)

5. Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar

6. Post-Equipment
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system

7. Braking
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.

8. Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve

9. Expert Mode
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.

Multi-Diag J2534 Characters:

Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory

Multi-Diag J2534 Package List:

VCI (Vehicle Communication Interface)
DB25 to OBD-2 Male Cable
OBD2 Male to OBD2 Female Cable






Attached File(s)
Multi-Diag 2018.txt
File Type: .txt
Downloaded: 2 times
Size: 97 bytes

Actia PT Programs List.txt
File Type: .txt
Downloaded: 3 times
Size: 879 bytes


Belalmondeo, proud to be a member of GarageForum since Mar 2019.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)